Cable blowing machines · Made in Italy

Looking for "optical fibre cable blowing machine on rent"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Start with the installation requirements, not simply the hire period

Looking for an optical fibre cable blowing machine on rent usually begins with a practical challenge: a crew needs suitable equipment for a defined installation window without immediately committing to ownership. Before arranging machinery for a worksite in Italy or elsewhere, establish exactly what the job demands. Cable diameter, duct internal diameter, route length, bends, changes in elevation and access conditions all influence machine selection. A unit that appears convenient on paper may be unsuitable if its permitted cable range, feeding arrangement or air requirements do not match the planned installation. Fibernet provides a direct point of contact for discussing its cable blowing machines and identifying the questions that should be resolved before an equipment decision. Founded in 2001, the company combines a longstanding technical background with the development of its own machinery, including Lady, introduced in 2021. For contractors comparing optical fibre cable blowing machine hire options, the first useful step is to prepare a concise project brief. Include the cable manufacturer's installation limits, duct dimensions, expected section lengths and the compressor available on site. Where possible, provide details of duct preparation and any known restrictions along the route. These details help turn a broad equipment enquiry into a meaningful technical discussion. Rental availability, geographical coverage, contract duration and delivery arrangements must be confirmed directly; they should never be assumed from a search result or a general product description. Equally important is understanding what a proposed arrangement actually includes. Ask whether the machine comes with the correct cable guides, duct connections, seals and other configuration components needed for your dimensions. Clarify whether additional equipment must be sourced separately and who is responsible for checking compatibility before dispatch. If several crews will use the equipment, agree who will inspect it at handover and how operating information will reach every user. A short assignment can become expensive when a missing adapter or unsuitable compressor prevents work from starting. Businesses considering optical fibre cable blowing machine rental should therefore evaluate readiness as carefully as duration. A useful enquiry states the planned start date, likely working days, delivery destination and whether the schedule may change. It also identifies the person authorised to discuss technical requirements. With this information, you can ask Fibernet about suitable machinery and the supply options currently available for your project. The objective is not merely to obtain temporary access to equipment, but to establish a workable installation plan with clear responsibilities, compatible components and realistic expectations. This approach supports better decisions whether the eventual solution involves a confirmed rental arrangement, purchasing a machine or reconsidering the equipment specification before work begins.

Check the complete blowing setup before equipment reaches the site

Successful cable blowing depends on the interaction between the machine, the cable, the duct and the compressed air supply. Selecting an optical fibre cable blowing machine on rent therefore requires more than checking that the cable physically fits through the unit. The feeding mechanism must be appropriate for the cable, and its settings must respect the cable manufacturer's limits. Excessive pushing force or unsuitable clamping pressure can damage a sheath or contribute to buckling, while insufficient traction can interrupt progress. The correct settings depend on the equipment and cable involved, so operators should follow the relevant instructions rather than copy values from a previous installation. When assessing a pneumatic optical fibre cable blowing machine, distinguish the air needed for the machine's drive system, where applicable, from the air required for the blowing process. Ask for the specified operating pressure, air flow and air quality requirements of the proposed configuration. A compressor's headline pressure alone does not establish suitability: usable flow under operating conditions and losses through hoses or connections also matter. Confirm these requirements with the supplier before allocating a compressor to the job. Duct condition deserves the same attention. Connections should be suitable for the intended pressure, and the route should be checked using appropriate procedures before the cable is introduced. Obstructions, water, leaks or poorly assembled joints can reduce performance and complicate diagnosis. Where lubricant is appropriate, verify its compatibility with the cable sheath, duct material and equipment guidance. Never assume that adding more lubricant will resolve an underlying mechanical problem. Contractors comparing a drill driven optical fibre cable blowing machine with other drive arrangements should ask how feeding is controlled, what drive equipment is required and which limitations apply to the specific model. Different arrangements can suit different working conditions, but no drive type guarantees a particular installation distance. Route geometry, cable stiffness, duct occupancy and preparation remain decisive. During the equipment handover, inspect the cable path, accessible wear components, guards, connections and supplied accessories in accordance with the manufacturer's instructions. Establish how the operator can stop feeding and how the system must be isolated and depressurised before adjustments or maintenance. These are essential safety considerations, not optional administrative details. For an enquiry to Fibernet, describe the actual installation conditions rather than requesting a universal performance figure. Explain whether the crew will work from roadside access points, confined working areas or other locations that affect equipment positioning. Share the compressor specification and available working space. A technically complete discussion helps clarify what needs verification before deployment. It also makes comparisons more meaningful: the best arrangement is the one that can be configured correctly, operated safely and supported with clear information for the intended cable blowing task.

Compare temporary access with ownership using the full project cost

The financial case for an optical fibre cable blowing machine on rent depends on how often the equipment will work, how predictable the programme is and what happens when the schedule changes. A daily or weekly charge is only one part of the decision. Transport, collection, required accessories, insurance obligations, cleaning conditions and possible extension charges can all affect the overall cost, depending on the agreement offered. Ask for written confirmation of the items included and the responsibilities retained by each party. Clarify how delays, breakdowns and return inspections are handled before making assumptions about the budget. For a contractor with an isolated assignment, temporary access may deserve investigation. For a business with recurring installation work, comparing that arrangement against ownership can reveal a different balance. An optical fibre cable blowing machine price should be assessed alongside expected utilisation, configuration needs, maintenance requirements and the practical value of having equipment available when a job changes at short notice. Ownership also introduces responsibilities: storage, inspections, wear components and keeping the machine ready for the next crew must be accounted for. Neither approach is automatically preferable for every business. Build the comparison around realistic working days rather than the total duration of a contract. A machine may be required on a project for several weeks but operate only on selected days because ducts are not ready or access is restricted. Conversely, frequent short installations can create repeated transport and handover costs. Record these patterns before choosing an equipment strategy. If you are also considering a used optical fibre cable blowing machine, request evidence of condition, maintenance history and the accessories included. Check whether documentation and replacement components remain available for the specific model. A lower acquisition cost offers limited value if essential adjustments cannot be made or worn components prevent dependable use. Fibernet's background provides context for these purchasing discussions. The company was founded by Giancarlo Trinei, whose experience with early Italian fibre installations shaped its technical foundations. The next generation joined the business from 2010, and the introduction of Lady in 2021 marked a further step in its cable blowing machine development. For buyers and contractors working in Italy or coordinating international projects, a direct enquiry can establish current product information and clarify the supply arrangements available for their destination. Do not assume that rental, shipping terms or delivery dates are identical across markets. Provide the destination, required dates, cable dimensions and anticipated workload so that the discussion can address your actual needs. A sound decision combines technical compatibility with transparent commercial terms. Whether your priority is temporary equipment access or a longer term investment, seek a clearly defined configuration and a written quotation before committing resources.

Still looking for information about optical fibre cable blowing machine on rent?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information