Cable blowing machines · Made in Italy

Looking for "fibre optic cable blowing machine on rent"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your rental enquiry to the cable, duct and installation route

Choosing a fibre optic cable blowing machine on rent starts with understanding the installation rather than selecting equipment solely by its advertised daily rate. For contractors working in Italy, the right starting point is a clear description of the cable, the duct and the route to be completed. Cable outside diameter, construction, weight and permitted installation forces all affect machine selection. Duct internal diameter, material, condition and continuity are equally important. A machine that accommodates the cable diameter is not automatically suitable for every combination of cable and duct. Before requesting equipment, prepare the relevant cable datasheet and duct specifications, together with the expected section lengths and the number of bends. These details help establish whether a proposed configuration deserves further technical assessment. When evaluating a compressed air fibre optic cable blowing machine, remember that its performance depends on the complete installation arrangement. Airflow, pressure, connections, sealing components and the condition of the duct must work together. A compressor should therefore be assessed against the requirements of the selected machine and the planned application, not simply against a headline pressure figure. Air treatment requirements should also be checked, because moisture or contamination can affect equipment operation and installation conditions. The mechanical feeding system requires similar attention: cable guides, drive components and seals must match the intended cable without applying inappropriate pressure. Fibernet brings a technical background to these discussions. Founded in 2001, the company draws on founder Giancarlo Trinei’s experience with early optical cable installations in Italy during the 1980s. Its development of cable blowing equipment reached an important milestone in 2021 with the launch of Lady, its first machine in this category. For a rental enquiry, contact Fibernet to discuss the application and establish whether a suitable arrangement is available for your location and dates. Do not assume that every model, accessory or service is included automatically. Ask which cable guides and duct connections would be supplied, which compressor specifications apply, and what documentation accompanies the equipment. A useful enquiry also explains site access, available working space, intended operating hours and how cable drums will be positioned. If several installation sections have different characteristics, describe them separately rather than presenting only a total distance. This makes the discussion more precise and reduces the risk of requesting an unsuitable configuration. The practical objective is to identify a cable blowing machine for fiber optic cable installation that suits the actual job, with clear limits and responsibilities agreed before equipment is dispatched or site work begins.

Compare the full project cost, not just the daily hire rate

A short installation programme can make temporary equipment access worth investigating, but a sound comparison considers the complete cost of getting the machine ready, using it and returning it. When assessing a fibre optic cable blowing machine on rent, establish how the charging period is calculated and what happens if the site is not ready on the agreed starting date. Delivery, collection, accessories, cleaning requirements and any deposit can influence the final commitment. Ask whether the quoted period includes transport days, whether an extension requires advance approval, and how delays are handled. These questions are particularly useful when excavation schedules, duct readiness or access permissions remain uncertain. They help purchasing teams compare proposals on equivalent terms instead of treating every daily figure as directly comparable. A fibre optic cable blowing machine hire enquiry should distinguish the machine itself from the supporting equipment needed to operate it. A compressor, air treatment components, suitable hoses, compatible connectors and cable handling equipment may need separate arrangements. Confirm the scope in writing rather than assuming that an accessory visible in a photograph will be supplied. The same applies to spare seals and other application specific components: their availability, suitability and replacement conditions should be clarified before the installation window. Discuss the procedure for reporting faults, obtaining technical assistance and authorising repairs, including any restrictions on work performed by third parties. Contractors should also compare temporary access with ownership over a realistic workload. The fibre optic cable blowing machine price is only one part of an ownership calculation, alongside maintenance, storage, transport and the accessories required for different jobs. Conversely, repeated short hire periods can create administrative and logistical costs that deserve attention. Neither approach is automatically better; the appropriate choice depends on utilisation, project predictability, available capital and the range of cable and duct combinations encountered. Fibernet’s showcase website provides a starting point for discussing its equipment and submitting a project enquiry, rather than treating an unconfirmed online estimate as a binding offer. Explain the expected duration, operating location, installation conditions and decision deadline so the team can address the relevant questions. For work outside Italy, request confirmation of the destination arrangements and clarify any transport documentation, customs responsibilities or return procedures that may apply. Availability, commercial terms and delivery feasibility must be established for the specific request. A carefully prepared comparison gives project managers a clearer basis for deciding how to obtain equipment, helps avoid avoidable downtime and makes the financial implications visible before a commitment is made.

Prepare the site and agree a controlled operating process

Successful use of temporarily supplied equipment depends on preparation and disciplined operation as much as on machine selection. Before the equipment reaches site, check that the planned installation section is accessible, that the duct has been prepared according to the applicable procedure, and that the team understands the cable manufacturer’s installation limits. Confirm how duct continuity, cleanliness and suitability will be verified, and record any route features that could affect cable movement. Sharp changes of direction, damaged duct sections and poorly arranged entry points should be investigated before attempting to compensate with higher operating settings. When requesting a fibre optic cable blowing machine on rent, explain who will operate it and what experience they have with comparable equipment. This helps identify the documentation and technical clarification needed before work begins, without assuming that hiring a machine automatically includes operator instruction or on site assistance. A pneumatic fibre optic cable blowing machine requires particular attention to safe air connections and the relationship between the air supply and the feeding mechanism. Operators should follow the specific equipment manual, inspect hoses and couplings, and ensure the system is depressurised before opening pressurised components. Settings must remain within the limits stated for the machine, cable, duct and associated fittings. If cable movement becomes irregular or resistance increases unexpectedly, stop and investigate the cause rather than increasing force without a diagnosis. The permitted operating method should always take precedence over assumptions based on a previous installation. A practical site plan also addresses cable drum positioning, a stable machine setup and communication between personnel at the relevant access points. Keep the cable path controlled, avoid unnecessary bending, and prevent contamination from entering prepared components. During installation, record useful operating information such as the section attempted, approximate distance achieved, relevant settings and the reason for any interruption. These observations help the team assess recurring difficulties and communicate clearly when requesting technical advice. They should not be interpreted as proof that the same settings will suit a different route or cable. With fibre optic cable blowing machine rental, end of use procedures also deserve advance agreement. Confirm how the equipment should be cleaned, which components must be returned, and how condition checks will be documented. Report unusual behaviour or damage promptly so that the next decision is based on accurate information. Fibernet’s family led development combines its founder’s technical background with the next generation’s involvement, which began in 2010. For your installation project in Italy or an international destination, provide the operational details and ask the company to clarify equipment suitability, available arrangements and the practical steps required before proceeding.

Still looking for information about fibre optic cable blowing machine on rent?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information