Cable blowing machines · Made in Italy

Looking for "fibre cable blowing machine hire"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match your hire enquiry to the actual installation

Choosing equipment for a cable installation starts with the route, not simply the length of the hire period. Contractors considering fibre cable blowing machine hire need to establish whether the proposed machine can handle their cable, duct and working conditions before discussing a daily or weekly rate. Cable outside diameter, duct internal diameter, cable construction and the condition of the installed duct all influence the selection process. A machine that appears suitable from a photograph may require different guides, seals or drive components for the intended combination. Providing these details at the enquiry stage helps avoid a situation in which equipment reaches the site but cannot be configured correctly for the planned work. Fibernet provides a point of contact for discussing its cable blowing equipment and clarifying the options relevant to your project; any hire availability, commercial conditions and delivery arrangements should be confirmed directly rather than assumed. When preparing an enquiry for optical fibre cable blowing machine hire, include the approximate length of each section, the number of installation stages and any information about bends, joints or changes in level. These details help frame a realistic technical discussion, although they cannot establish a guaranteed blowing distance without considering the full installation conditions. The compressor also deserves attention from the beginning. Its available pressure, air delivery and air treatment must be checked against the requirements of the selected equipment and the limits of every component in the system. Increasing pressure is not a substitute for identifying a restricted duct, an unsuitable seal or excessive friction. A useful project brief therefore brings together cable and duct specifications, route information, compressor details and the intended working schedule. For contractors operating across Italy, access restrictions, movement between sites and the location of the compressor may also affect equipment planning. International enquiries require the same technical preparation, together with confirmation of transport responsibilities and any applicable documentation. Ask what is included with the machine and what must be supplied separately, especially connection fittings, cable-specific accessories and consumable components. Establish who will check the equipment before use and how any compatibility questions will be resolved before dispatch. If the programme includes several cable sizes, explain this explicitly rather than assuming that one configuration covers every installation. The objective is a clearly defined equipment requirement that supports an informed commercial decision. This approach makes the conversation more productive, reduces preventable uncertainty and helps your installation team evaluate whether the proposed arrangement fits the work actually scheduled, rather than an idealised version of the project.

Compare temporary access with the cost of ownership

The financial case for fibre cable blowing machine hire depends on how often the equipment will work, how predictable the programme is and what resources your business already has available. A short installation campaign may justify investigating temporary access, while repeated projects can make ownership worth examining. Neither route is automatically cheaper. A meaningful comparison considers the complete operating period, including mobilisation, configuration, transport, planned maintenance and the consequences of equipment being unavailable when crews are ready. Contractors should separate confirmed charges from assumptions and request written clarification wherever a quotation leaves responsibilities unclear. Start with the expected number of working days, then distinguish these from the number of calendar days for which equipment might need to remain on site. Delays caused by access permissions, incomplete duct preparation or changes to the installation sequence can alter the comparison substantially. Where a hire offer exists, ask how the supplier treats extensions, collection dates, cleaning, wear and damage. Also establish whether the proposed package includes the accessories needed for your specific cable and duct combination. An apparently attractive rate may not represent the full project cost if essential components or transport are excluded. When reviewing a fibre cable blowing machine price, apply the same discipline to a purchase quotation. Check the configuration being offered, the available documentation and the arrangements for technical assistance, maintenance and replacement parts. Compare like with like rather than contrasting a complete purchase package with an incomplete temporary-use estimate. For a business considering a used fibre cable blowing machine, the condition of the drive system, controls, seals and cable-contact components deserves particular scrutiny. Ask for a clear description of its condition and, where available, its maintenance history. Confirm that the configuration suits the intended application and clarify whether compatible parts remain obtainable. A lower acquisition cost does not remove the need for technical checks. Fibernet, founded in 2001, brings an established technical background to discussions about its equipment. Its first cable blowing machine, Lady, was launched in 2021. These facts provide useful company context, but the commercial decision should still rest on the current specification and a quotation tailored to your requirements. Contact Fibernet to establish which equipment options can be discussed for your project and to confirm the relevant terms directly. For contractors handling multiple installation contracts, a practical comparison can use several workload scenarios: one short campaign, intermittent use and sustained deployment. Include realistic assumptions about storage, upkeep and staff familiarity with the equipment. The result should be a transparent decision based on expected utilisation and project risk, not simply the lowest figure shown at the top of a quotation.

Prepare the site before the machine arrives

A well-prepared site helps turn an equipment enquiry into a workable installation plan. Before the selected machine arrives, the installation team should review the duct route, identify access points and confirm that the proposed working area allows safe positioning of the machine, cable drum and compressor. Cable handling must respect the cable manufacturer's limits, including its minimum bending radius and any restrictions on installation forces. The machine should not be expected to compensate for poor drum positioning or a cable path that introduces avoidable resistance before the cable even enters the duct. For a compressed air fibre cable blowing machine, the air supply and all associated connections require careful assessment. Use compatible components with appropriate ratings, follow the equipment documentation and establish a safe method of depressurisation before anyone opens or disconnects a pressurised part. The permitted operating conditions must come from the relevant manufacturers, not from a general assumption about what blowing equipment can tolerate. Duct preparation is equally important. Its continuity, condition and suitability for the intended operation should be checked using the procedures appropriate to the installation. Any cleaning or lubrication method must be compatible with the cable, duct and machine involved. During operation, the crew should monitor progress and respond to abnormal resistance rather than attempting to overcome every interruption by increasing pressure or drive force. Record the conditions associated with each installation section so that decisions remain traceable and subsequent work can benefit from what the team has observed. Contractors exploring fibre optic cable blowing machine hire should ask how the proposed equipment is handed over and which operating documents accompany it. Clarify the process for obtaining technical guidance and reporting a fault, without assuming that on-site attendance or a replacement machine is automatically included. These practical details can be as important as the booking dates. Fibernet's development reflects the technical experience of founder Giancarlo Trinei, whose work with fibre installations in Italy began in the early 1980s. The company's family-led development and the introduction of Lady provide context for a direct conversation about machine selection, configuration and intended use. For fibre cable blowing machine hire enquiries, explain whether the work is in Italy or another destination, and ask which supply arrangements are available for that location. International transport, return arrangements where applicable and delivery timing all require explicit confirmation. Before committing to a start date, ensure that the equipment configuration, accessories and responsibilities are documented. A brief readiness review involving the project manager and installation crew can identify missing information while there is still time to resolve it. The aim is straightforward: arrive with suitable equipment, a prepared route and an agreed operating approach, giving the team a sound basis for carrying out the installation safely and consistently.

Still looking for information about fibre cable blowing machine hire?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information