Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
A successful fiber cable blowing machine rental enquiry starts with the installation conditions, not simply the number of days a machine will be needed. Contractors working on Italian sites should first establish the cable outside diameter, the duct internal diameter, the planned installation length and the condition of the route. These details help determine whether a proposed machine and its accessories are appropriate for the job. Cable construction also matters: the manufacturer's limits for pushing force, bending radius and installation conditions must guide equipment selection. A machine that suits one cable and duct combination should not automatically be assumed suitable for another, even when the outside dimensions appear similar. For an informed discussion with Fibernet, prepare the relevant cable and duct specifications alongside your expected working dates and site location. Explain whether the route includes frequent bends, intermediate access points, changes in elevation or previously installed ducts whose condition needs verification. Each factor can affect the practical installation plan and the equipment configuration worth considering. When evaluating a cable blowing machine for fiber optic cable installation, ask which cable guides, duct clamps and sealing components are needed for the actual dimensions involved. Correctly matched components help maintain alignment and control air leakage, while unsuitable parts can undermine performance before blowing begins. The compressed air supply deserves equally careful attention. Pressure alone does not describe compressor suitability: available airflow, air quality, connection arrangements and the machine manufacturer's requirements all need checking. Moisture or contamination in the supply can create avoidable operational difficulties, so discuss any necessary air treatment rather than assuming the site's existing compressor is adequate. A compressed air fiber cable blowing machine must be assessed as part of this complete working arrangement, not as an isolated item. Fibernet's technical background and development of its first cable blowing machine, Lady, in 2021 provide a relevant basis for discussing machine selection. However, rental availability, specific configurations and commercial conditions should be confirmed directly rather than inferred from a product description. Send a concise project brief through www.fibernetsrl.com and ask what information is required to assess your request. Include the intended delivery destination, the responsible site contact and any access restrictions affecting equipment handling. For work in Italy, clarify the delivery address and the dates when your team can receive and inspect the equipment. This preparation makes the discussion more productive and helps separate genuine machine requirements from assumptions. It also gives your installation team a clearer starting point for checking compatibility before committing resources or scheduling a blowing operation. Where specifications are incomplete, identify the missing information early so that the enquiry can progress on a sound technical basis.
The financial case for fiber cable blowing machine rental depends on how the equipment will actually be used throughout the project. A short installation window may make temporary access worth investigating, while repeated work across several sites may justify comparing rental with ownership. Neither option is automatically better. Start by estimating productive blowing days separately from delivery time, site preparation, weather interruptions and periods when the crew is waiting for access. A machine can remain allocated to a project without installing cable, and the commercial consequences depend on the terms agreed with the supplier. Ask Fibernet whether rental is available for your intended destination and dates, then request a written explanation of what any proposed arrangement includes. Useful points to clarify are the machine configuration, supplied accessories, transport responsibilities, collection arrangements, security requirements and the procedure for reporting damage or faults. Any deposit, minimum hire period, extension charge or cancellation condition should be established before acceptance, rather than assumed. When comparing proposals, avoid treating the headline daily rate as the complete cost. A technically unsuitable configuration or a missing cable guide can have a greater effect on the job than a modest difference in the quoted equipment charge. Compressor provision, compatible hoses, air treatment and the correct duct connection also need to be accounted for where relevant. The same practical approach applies when researching fiber cable blowing machine price information for a possible purchase. Compare a defined configuration with another defined configuration, and distinguish essential components from optional equipment. Ownership calculations should include expected utilisation, storage, routine maintenance, wear parts and the internal responsibility for keeping the equipment ready. If a used fiber cable blowing machine is also under consideration, ask for its identification, service history, operating condition and evidence that the required accessories remain available. A lower initial expenditure does not establish suitability or predict the cost of bringing equipment into dependable working condition. Fibernet was founded in 2001 and combines its Italian roots with an ambition to serve installation businesses internationally. For customers planning work in Italy, this makes a direct technical and commercial enquiry a sensible step towards understanding the options actually available. Businesses elsewhere should also confirm delivery feasibility, transit timing, documentation and return arrangements for their destination. Do not assume that a machine available for sale is necessarily offered for rental, or that the same terms apply across countries. Provide your likely annual workload and the timing of your current project so that the discussion can address both immediate access and longer term equipment needs. A useful decision is one supported by compatible equipment, transparent responsibilities and realistic scheduling, rather than a price viewed without its operational context.
Good preparation turns a machine enquiry into a workable installation plan. Before arranging fiber cable blowing machine rental, identify who will receive the equipment, who will inspect it and who is authorised to operate it. The team should have access to the relevant operating instructions and understand the limits of the specific machine supplied. Familiarity with another model is not a substitute for checking the controls, protective features and setup procedure of the actual unit. At handover, verify the machine identification and inspect the supplied components against the agreed inventory. Record the condition of guides, seals, clamps, connections and other accessible wear points using the supplier's recommended process. If anything appears damaged, incomplete or unsuitable for the specified cable, raise it before starting work. Site preparation should include checking that the intended duct route is ready for installation and that any testing or cleaning is carried out using appropriate procedures. Confirm that access points can be reached safely and that the machine, compressor and cable drum can be positioned without compromising the manufacturer's requirements. Cable payout deserves particular attention: uncontrolled drum movement, poor alignment or excessive bending at the entry point can disrupt an otherwise suitable setup. Plan how the crew will communicate during blowing, especially where the receiving end is distant or out of sight. Agree who can stop the operation and what signs require an immediate pause. Air leaks, unexpected resistance, unstable feeding or unusual machine behaviour should prompt assessment rather than an automatic increase in pressure or pushing force. Operating settings must remain within the documented limits of the machine, cable and associated components. When discussing fiber optic cable blowing machine rental, ask how technical questions should be reported and what information the supplier needs to investigate a problem. Useful records may include the cable and duct dimensions, route conditions, machine configuration and observations made before the interruption. Never assume that remote assistance, replacement equipment or on-site attendance is included unless the agreement explicitly confirms it. An optical fiber cable blowing machine should also be cleaned, inspected and stored as directed between work periods, with particular care around components exposed to dirt and installation residues. Before return, follow the agreed preparation procedure and confirm which accessories must accompany the unit. Keep a record of the return condition and arrange collection within the agreed window. These measures support an orderly handover and reduce uncertainty about missing parts or avoidable damage. Fibernet's family-led development, rooted in Giancarlo Trinei's technical experience, gives your enquiry a clear company context without replacing the need for project-specific checks. Contact www.fibernetsrl.com with your working requirements to establish which machine options, availability and support arrangements can be confirmed for your installation.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.