Cable blowing machines · Made in Italy

Looking for "fiber cable blower price"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Understand what your cable blowing equipment quotation should include

A meaningful fiber cable blower price starts with the work your installation team needs to complete, rather than an isolated figure on a product page. Contractors working on Italian deployment projects can face very different conditions: short sections with frequent access points, longer duct routes, restricted working areas, or changes in cable dimensions between contracts. These differences affect which machine configuration deserves consideration and what information a supplier needs before preparing a quotation. Fibernet, founded in Italy in 2001, introduced its first cable blowing machine, Lady, in 2021. For companies evaluating its equipment, a direct enquiry provides an opportunity to explain the intended application and request a commercial proposal based on actual requirements. Begin with the cable outside diameter, duct internal diameter, intended route length, and any available information about bends or changes in elevation. Include the cable manufacturer's limits for installation forces and the compressor specifications available on site. Pressure alone does not describe an air supply adequately; the required airflow and air quality must also be checked against the selected equipment and operating conditions. These details help establish whether the proposed configuration is suitable before price becomes the deciding factor. When comparing a fiber optic cable blower price, ask suppliers to identify exactly what their offers cover. A machine quotation may need separate clarification about cable guides, sealing components, duct connections, transport arrangements, documentation, and any additional equipment required for operation. Do not assume that every accessory shown in a photograph is included or that one set of components will accommodate every cable and duct combination. Request an itemised description and confirm the compatibility range in writing. This makes comparisons more transparent and reduces the likelihood of discovering missing items immediately before a scheduled installation. Italian buyers should also clarify VAT treatment, delivery charges, payment conditions, and the expected availability of the quoted configuration. Where delivery is needed outside Italy, ask Fibernet to confirm destination availability, shipping terms, and any documentation relevant to the transaction. A useful fiber cable blower price enquiry therefore combines technical information with purchasing details. Tell the supplier how frequently the machine will be used, whether several crews will share it, and which cable sizes appear most often in your contracts. If upcoming projects introduce different requirements, mention those too, without assuming future compatibility. This approach supports a quotation that can be assessed against real installation needs, helping procurement staff and site managers reach the same understanding of what is being purchased, what remains to be supplied separately, and which operating conditions require further verification.

Evaluate operating costs alongside the initial purchase

The purchase figure is only one part of the economic case for cable blowing equipment. For a contractor, value also depends on preparation time, compatibility with recurring jobs, maintenance requirements, and access to the components needed to keep work moving. A lower initial quotation does not automatically produce a lower cost per completed section, just as a higher quotation does not guarantee better results. Assess the equipment against a realistic installation scenario, using assumptions that your site supervisors can verify. Start by describing a representative working day. How often will operators move between access points? Will the machine need to be transported by hand over uneven ground? How frequently will cable sizes change? What compressor is available, and can it deliver the specified airflow under working conditions? Answers to these questions make a discussion about fiber cable blower price more useful because they connect the investment to everyday tasks. Ask for the machine's confirmed dimensions, weight, setup procedure, and required operating resources rather than relying on general claims about portability or productivity. Installation performance also depends on factors beyond the blowing machine itself. Duct cleanliness, continuity, sealing, bends, lubrication where specified, and cable characteristics can all influence the outcome. A contractor comparing equipment should therefore avoid treating a quoted maximum distance or speed as a result that every site will achieve. Ask under which conditions any stated performance was obtained and whether those conditions resemble your planned work. Consider requesting a practical assessment using representative cable and duct dimensions, if available, and agree on what the assessment should demonstrate. Maintenance deserves the same attention as headline performance. Ask Fibernet which checks apply to the proposed machine, how wear components are identified, and what replacement procedures are described in the documentation. Clarify spare parts availability, applicable warranty terms, and how technical enquiries are handled before placing an order. These are questions to confirm with the supplier, not benefits that should be assumed from a product name. When reviewing a fiber optic cable blowing machine price, compare equivalent configurations and clearly documented support arrangements. Your internal calculation can then include the purchase cost, necessary accessories, compressor provision, consumables, routine maintenance, and transport between sites. Record any uncertain figures as estimates rather than presenting them as guaranteed savings. For companies operating in Italy, account for the practical demands of urban worksites and coordination with other crews when estimating utilisation. A machine that matches the work programme and available resources may be more useful than one selected solely on a headline specification. The objective is to make a defensible purchasing decision: an investment supported by technical compatibility, clear commercial terms, and a realistic understanding of the conditions under which your team will operate.

Prepare a focused enquiry for Fibernet

A well prepared enquiry helps turn a broad search for fiber cable blower price into a practical conversation with Fibernet. The company combines its Italian origins with an ambition to serve the international cable blowing equipment market, drawing on founder Giancarlo Trinei's technical experience dating back to the early 1980s. Its family business continued into a new generation from 2010, with Matteo, Marta, and Ismael joining the company. For a prospective buyer, this background provides context, but the purchasing decision should still rest on the suitability of the proposed machine, the information supplied, and the conditions stated in the quotation. Start your message with a concise description of your business and the projects for which you need equipment. Explain whether you carry out installations directly, supply several operating teams, or are purchasing for a specific contract. State the delivery destination and the date by which the equipment would be required, while asking the supplier to confirm achievable timing. Avoid building a works programme around an assumed dispatch date before receiving written confirmation. Next, provide the technical details that distinguish your application. Include cable diameter, relevant cable construction information, duct dimensions, typical section lengths, and known route constraints. If several combinations are involved, describe each clearly so that compatibility can be checked individually. Attach the relevant cable and duct specifications where available. State whether a compressor is already owned, hired for each project, or still to be selected. This allows questions about the air supply to be addressed before the quotation is treated as complete. When considering a cable blower for fiber optic cable installation, ask how configuration changes are managed and which components are needed for the combinations you have described. Request the documentation necessary to assess operating procedures and applicable safety requirements. Your purchasing team should also establish who will review the technical proposal internally, since a quotation approved only on commercial grounds can leave important installation questions unresolved. If a used fiber cable blower is being considered as an alternative, compare it with the proposed new equipment on a documented basis. Check its identity, condition, maintenance history, included components, and availability of suitable replacement parts; do not assume that a lower asking price offsets unknown wear or missing accessories. There is no need to treat second hand availability as a Fibernet offering unless the company confirms it. Finally, ask for a written proposal that separates equipment, accessories, delivery, taxes where applicable, and any optional items. Confirm the validity period of the quotation and the terms governing payment and warranty. Contact Fibernet through www.fibernetsrl.com with these details to discuss the available options and request a price grounded in your intended installation work rather than an incomplete comparison.

Still looking for information about fiber cable blower price?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information