Cable blowing machines · Made in Italy

Looking for "fiber blowing machine hire"?

From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.

Expert advice direct from the manufacturer / Free demonstration on request

Some of our customers.

Keep your installation moving with Fibernet cable blowing machines.

On-site training
Worldwide Technical support
Spare parts ready to ship
Replacement machine if yours breaks down

Photos and stories from installers, published by Fibernet.

Cable blowing machines in action.

Three installers testing the Opera cable blowing machine on siteEnlarge +
Opera with the installers on site.
A Fibernet technician showing installers how to use the cable blowing machineEnlarge +
Hands-on demonstration with a Fibernet technician.
Close-up of a Geniale cable blowing machine during an outdoor testEnlarge +
A closer look at Geniale in the field.
GoogleExcellentBased on 176 reviewsRead the reviews

Emanuele Zanda

Google review
Google

“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”

Read on Google

Giuseppe Ares Rosa

Google review
Google

“I had the chance to try the Opera cable blowing machine on site…”

Read on Google

Paolo Manna

Google review
Google

“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”

Read on Google

Stories from installers

See the difference on site.

Testimonial · Opera

“We cut our working time by 80%.”

Experience on site

“2 km of cable in half a day.”

Hear the results from the installers themselves. Watch their testimonials right here.

Product videos

Meet the machines.

Product overview

LADY

Product overview

GENIALE

Product overview

OPERA

Three machines. Find your fit.

Every installation is different.
Find your cable blowing machine.

Start with the job at hand. Our technician can answer your questions about the right setup.

01 / SHORT RUNSFibernet Lady cable blowing machine

Compact and lightweight

LADY

A compact, lightweight machine for short runs.

Cable diameter
1.2–10 mm
Duct diameter
5–16 mm
Pushing force
Up to 150 N
Maximum speed
80 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Lady
02 / LONG RUNSFibernet Opera pneumatic cable blowing machine

Pneumatic power

OPERA

A pneumatic machine for long cable runs.

Cable diameter
4–16 mm
Duct diameter
7–63 mm
Pushing force
Up to 900 N
Maximum speed
110 m/min
Cable protection
Twin drive beltsrubber-coated
I’m interested in Opera
03 / ELECTRIC DRIVEFibernet Geniale electric cable blowing machine

Electric, with two gears

GENIALE

For short and long runs. Two gears let you match force and speed to the job.

Cable diameter
1.2–8 mm
Duct diameter
5–16 mm
Pushing force
400 / 110 NGear 1 / Gear 2
Maximum speed
60 / 125 m/minGear 1 / Gear 2
Cable protection
Twin drive beltsrubber-coated
I’m interested in Geniale

Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.

Direct from the manufacturer

The machine matters.
Who supports you
matters even more.

When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.

Speak to a technician

Direct support

A specialist technician can help when you need it.

Spare parts available

Spare parts ready to ship, direct from the manufacturer.

Replacement machine

If your machine breaks down, a replacement may be available within 48 hours.

Check availability and terms with your technician.

Dedicated training

Get help making the most of your machine, from your very first job.

See it in action before you choose

Put it to the test.
On your own site.

Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.

Request a free demonstration
An operator using an Opera cable blowing machine on site

Match the machine to the installation before arranging hire

Choosing fiber blowing machine hire starts with the cable and duct combination, not simply the number of days a machine will be on site. Contractors working in Italy need equipment that suits the actual installation conditions, including cable diameter, duct internal diameter, route length, bends and available compressed air. An unsuitable configuration can interrupt production even when the machine itself is functioning correctly. Before approaching Fibernet, prepare the cable manufacturer’s technical information, the duct dimensions and a realistic description of the route. These details provide a useful starting point for discussing machine suitability and establishing which commercial options are available for your project. Hire availability, geographical coverage and contractual terms should always be confirmed directly rather than assumed from a general equipment enquiry. A practical assessment should also identify how the cable will be fed into the machine. Drum positioning, payout resistance and the space available around the working area can affect the consistency of the installation. The operator needs a stable arrangement that allows the cable to enter without unnecessary bending or friction. Equally important is the condition of the duct: contamination, water, poorly prepared joints or unexpected restrictions can undermine an otherwise appropriate setup. Any cleaning, proving or lubrication procedure should follow the relevant equipment, cable and duct guidance. When comparing fiber cable blowing machine hire options, ask which accessories are included and which must be specified separately. Cable guides, duct connections and sealing components need to match the intended dimensions; the presence of a machine alone does not establish that the complete arrangement is ready for work. Compressed air requirements should also be checked against the selected model and operating conditions, including the need for suitable air treatment where specified. Never substitute an assumed pressure or airflow figure for verified technical instructions. Site planning extends beyond technical compatibility. Consider delivery access, unloading arrangements, secure storage and the availability of personnel authorised to operate the equipment. If the installation is divided into several work fronts, determine whether one machine can move between them efficiently or whether that movement would create avoidable waiting time. Establish a realistic collection or dispatch date only after these dependencies have been reviewed. Fibernet launched its first cable blowing machine, Lady, in 2021, building on the technical background of a company founded in 2001. For a contractor evaluating a fiber optic cable blowing machine, that manufacturing perspective provides a relevant basis for asking detailed questions about intended use and configuration. Describe the work precisely when contacting the team, and request confirmation of the appropriate machine, supporting documentation and available supply arrangements before committing your installation schedule.

Assess project costs without overlooking practical constraints

A useful budget for fiber blowing machine hire accounts for the whole period during which equipment is committed to the project, including time that may not produce installed cable. Delivery, site preparation, weather interruptions, access restrictions and changes to the installation sequence can all influence the final cost. Begin with the expected working programme, then distinguish productive installation days from standby days and transport time. Ask how the proposed hire period is calculated, whether a minimum duration applies and what happens if the work finishes early or overruns. These are points to clarify in a written quotation, not conditions that should be presumed to apply to Fibernet or any particular arrangement. The quoted equipment charge is only one element of the comparison. Depending on the agreed scope, a contractor may also need to budget for compatible accessories, a suitable compressor, transport, consumables and the time required to prepare the equipment for the specified cable. Check whether cleaning, inspection, damage cover, deposits or return arrangements affect the commercial proposal. A transparent comparison uses the same assumptions for each option, so an apparently lower daily rate is not compared with a more comprehensive package without recognising the difference. Explain your intended application when requesting information, because an accurate configuration is more valuable than a headline figure detached from the installation. For businesses with recurring work, the fiber blowing machine price becomes relevant alongside short term access. Purchasing may warrant consideration where utilisation is predictable, crews use consistent cable and duct combinations, and the business can manage storage and maintenance. Hire may be worth investigating where demand is intermittent or a defined contract creates a temporary equipment requirement. Neither approach is automatically cheaper: the decision depends on actual utilisation, finance, maintenance responsibilities and the consequences of equipment being unavailable when needed. Compare realistic scenarios rather than assuming every planned day will generate the same output. Availability also has a financial dimension. If a required machine or accessory cannot reach the site in time, even an attractive quotation may not support the programme. Confirm dispatch arrangements, the expected arrival window and any limitations associated with the destination. For projects outside Italy, clarify transport responsibilities and any customs requirements relevant to the proposed transaction. International availability and delivery terms must be confirmed for the specific enquiry. An optical fiber cable blowing machine hire request should therefore include the destination, intended dates, cable and duct dimensions, and an outline of the route. Fibernet can be approached with this information to discuss suitable equipment and establish the commercial options currently available. The objective is a documented decision that aligns expenditure with the installation task, while avoiding preventable costs caused by missing accessories, unclear responsibilities or an unrealistic programme.

Prepare the crew and agree the handover before work begins

Successful fiber blowing machine hire depends as much on preparation and communication as on selecting the equipment. Before the planned installation date, identify who will receive the machine, who will check its configuration and who will operate it. The receiving team should compare the delivered items with the agreed documentation and report any missing components or visible damage before work starts. Confirm that the relevant operating instructions are available and understood by the personnel using the equipment. Familiarity with another model is not a substitute for following the instructions supplied for the specific machine, particularly where controls, adjustments or safety procedures differ. The handover should establish the permitted cable and duct ranges for the agreed setup, the required connections and the checks that precede operation. Operators should understand how to stop the equipment safely, isolate the relevant energy sources and respond to an abnormal condition. Moving components and compressed air require particular care, with guarding, protective equipment and working methods determined by the manufacturer’s instructions and the site risk assessment. Do not attempt adjustments or maintenance while the equipment remains energised or pressurised unless an authorised procedure explicitly requires it. Clear responsibilities help prevent a rushed start from becoming an avoidable interruption. Once the working area is prepared, record the initial setup and the observations made during the first installation section. Useful records include the cable and duct identification, the route section, relevant operating settings and any interruptions. These notes can help a supervisor distinguish an equipment issue from a route restriction or a cable feeding problem. If progress changes unexpectedly, the appropriate response is to stop and investigate within the applicable procedures, rather than continually increasing force or air pressure. Equipment limits and cable manufacturer restrictions remain the governing references throughout the job. Contractors comparing fiber optic cable blowing machine hire proposals should ask how technical enquiries are handled during the agreed period. Clarify contact details, communication hours and the procedure for reporting a fault; do not assume that replacement equipment or an on site intervention is included. Similarly, agree what routine checks the operator must perform and which interventions require authorisation. This is particularly important when several crews share a machine or when equipment moves between sites during one project. Fibernet’s background combines a family founded business established in 2001 with the development of its Lady machine, introduced in 2021. That history is relevant when discussing the intended application of a fiber blowing machine, but the final choice should still rest on confirmed specifications and project requirements. Before returning equipment, follow the agreed cleaning and packing instructions, check the accessory inventory and document its condition. A clear handover at both ends of the project helps protect the working relationship and makes subsequent equipment planning more straightforward.

Still looking for information about fiber blowing machine hire?

Fill in the form and discover what Fibernet Srl can do for you!

Contact us!

Before you get started

Have a question?
Start here.

If you prefer, speak to us directly.

+39 346 652 9915
Which cable blowing machine is right for my site?

Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.

Can I see the machine in action before I buy it?

Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.

How much does a Fibernet cable blowing machine cost?

To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.

What support will I get after purchase?

Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.

Your next project
starts with the right choice.

Tell us about your job. We’ll help you find the right cable blowing machine.

CallRequest information