Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Choosing a drill powered fibre optic cable blowing machine starts with understanding the cable, the duct and the conditions in which your team will work. For telecommunications contractors operating on Italian streets, inside service chambers or along prepared duct routes, compact equipment can be useful when access and working space are limited. However, portability alone does not establish suitability. Cable diameter, duct internal diameter, route length, changes of direction and the condition of existing ductwork all influence the installation process. Before selecting equipment, prepare these details and discuss them with Fibernet so that the conversation focuses on your actual application rather than a headline performance figure. A clear technical brief helps identify which machine configuration and accessories should be assessed for the job. In a typical drill driven fibre optic cable blowing machine, the drill supplies mechanical drive to the feeding mechanism, while compressed air supports the cable's progress through the duct. These functions must work together without subjecting the cable to excessive force. A battery drill does not, by itself, remove the need for a suitable compressed air supply. Ask which drill characteristics are required, how the drive interfaces with the machine and what operating controls are provided. Compatibility must be checked against the specific equipment documentation rather than assumed from the appearance of a drill or its advertised power. The same care applies to cable guides, seals and duct connections. Components should match the intended cable and duct dimensions, with adjustments made according to the manufacturer's instructions. Poor alignment or an unsuitable seal can undermine an otherwise carefully planned installation. On site, the cable drum also needs attention: it should allow controlled payout without introducing unnecessary resistance, twisting or contamination. A well-organised feed path gives the operator a better opportunity to recognise changes in behaviour before they become a problem. When comparing a drill powered optical fibre cable blowing machine with another installation arrangement, assess the entire working setup, including the compressor, hoses, drill, batteries and transport requirements. The smallest individual machine is not automatically the most practical complete system. Consider how often the crew changes location, whether equipment must be carried into restricted areas and how replacement consumables will be managed. Fibernet's company website provides a starting point for discussing these requirements directly. Share the cable and duct specifications, describe the intended route and explain your team's preferred working method. That information supports a more useful equipment enquiry and a quotation discussion grounded in the conditions your installers actually face.
Successful cable blowing depends on preparation that begins before the machine is connected. A drill powered fibre optic cable blowing machine should be assessed as one part of a complete installation method, not as a substitute for checking the duct route. Confirm that the intended duct is continuous, correctly identified and suitable for the proposed cable. Check accessible joints, connections and termination points, and investigate any uncertainty about obstructions or damage before introducing the cable. Where the project specification calls for duct testing or cleaning, complete those tasks using approved procedures and compatible equipment. Starting with a verified route reduces avoidable interruptions and makes it easier to distinguish a machine adjustment issue from a duct problem. Air supply deserves particular attention because pressure alone does not describe compressor suitability. Available airflow, hose arrangement, connection losses and air quality can all affect the working conditions at the machine. Request the requirements for the exact model under consideration and compare them with the compressor's documented capabilities. Never assume that a compressor already available on site is appropriate simply because it has been used with other tools. With a compressed air fibre optic cable blowing machine, respecting the operating limits of every connected component is essential, including the duct and its fittings. Follow the applicable instructions for connection, pressurisation, operation and safe depressurisation. Before feeding begins, establish who controls the machine, who observes the cable payout and how the crew will communicate. Position the drum to avoid sharp entry angles and keep the immediate working area clear. The operator should be able to observe cable movement and respond promptly if feeding becomes irregular. Changes in sound, vibration, resistance or cable behaviour should prompt assessment rather than an automatic increase in drive force. Stop and investigate when conditions depart from the approved procedure. Installation speed should remain subordinate to cable protection and controlled operation. Contractors evaluating a pneumatic fibre optic cable blowing machine alongside a drill-driven option should clarify precisely what powers the feeding mechanism in each proposed system. Compressed air may support cable movement in both arrangements, while the drive method differs. That distinction matters when planning site resources, controls and maintenance. Ask Fibernet to explain the configuration relevant to your enquiry instead of relying on broad category names. Finally, record the practical details of completed installations: cable and duct dimensions, route characteristics, equipment configuration and any interruptions encountered. These records can improve planning for comparable jobs without becoming promises of identical performance elsewhere. A realistic installation target accounts for bends, gradients, duct condition and site access, and recognises that achievable distance and speed must be evaluated for each application.
Fibernet was established in 2001, drawing on the technical experience of founder Giancarlo Trinei, whose work with optical fibre began during the early installations in Italy in the 1980s. That background provides context for the company's focus on practical equipment for installation professionals. In 2021, Fibernet introduced its first cable blowing machine, Lady, marking an important step in its development of cable installation products. The family business also began a generational transition in 2010, welcoming Matteo, Marta and Ismael into the company. For a contractor considering a drill powered fibre optic cable blowing machine, this company history is a starting point for a technical conversation, not a replacement for verifying the specifications of the proposed equipment. A useful purchasing brief brings together the operational and commercial questions that determine whether a solution fits your business. Describe the cable sizes you install most frequently, the duct dimensions your teams encounter and the typical access restrictions on your projects. Explain whether the equipment will serve one crew or move between several teams. Include the drill and compressor resources you already own, but ask for compatibility confirmation before treating existing tools as reusable assets. If you are also considering a battery powered fibre optic cable blowing machine, clarify whether that description refers to an integrated drive or to an external battery-powered drill. Similar wording can conceal meaningful differences in setup and operation. When discussing fibre optic cable blowing machine price, request a clear account of what the quotation includes. The machine, size-specific components, connections, consumables, documentation, packaging and delivery arrangements may need to be considered separately. Establish whether a drill or compressor is included rather than assuming that photographs show the complete supplied package. Ask how replacement wear components can be identified and ordered, and request the maintenance instructions relevant to the quoted model. Purchase cost becomes more informative when considered alongside preparation time, component availability and the practical requirements of keeping a crew operational. Fibernet's Italian roots are relevant to buyers who want to discuss equipment with an Italian manufacturer while preparing projects at home or abroad. For international enquiries, confirm destination-specific shipping arrangements, delivery expectations and documentation requirements directly before placing an order. These details should be agreed for the actual destination rather than inferred from a general product description. Use www.fibernetsrl.com to introduce your project and request information about the equipment appropriate to it. Provide your required quantities, expected purchasing schedule and technical brief so that the response can address concrete needs. The objective is a clearly specified purchase supported by verified information, with the supplied configuration understood before the machine reaches the worksite.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.