Emanuele Zanda
Google reviewRead on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Cable blowing machines · Made in Italy
From last-mile connections to long-distance runs, a Fibernet technician can help you choose the right machine for your fibre optic cable installation.
Opera, image 1 of 3
Expert advice direct from the manufacturer / Free demonstration on request
Some of our customers.






Keep your installation moving with Fibernet cable blowing machines.
Photos and stories from installers, published by Fibernet.






Read on Google“An excellent experience on the installer training course. The whole team was professional and knowledgeable.”
Read on Google“I had the chance to try the Opera cable blowing machine on site…”
Read on Google“I really enjoyed this course. It took place in a pleasant setting with friendly, helpful people.”
Stories from installers
Hear the results from the installers themselves. Watch their testimonials right here.
Product videos
Three machines. Find your fit.
Start with the job at hand. Our technician can answer your questions about the right setup.

Compact and lightweight
A compact, lightweight machine for short runs.

Pneumatic power
A pneumatic machine for long cable runs.

Electric, with two gears
For short and long runs. Two gears let you match force and speed to the job.
Specifications for the Fibernet range. The speeds shown are maximum values. Actual results depend on installation conditions and machine setup.
Direct from the manufacturer
When you’re working on site, you need practical answers. With Fibernet, you speak directly to the people who design and build your cable blowing machine.
Speak to a technicianA specialist technician can help when you need it.
Spare parts ready to ship, direct from the manufacturer.
If your machine breaks down, a replacement may be available within 48 hours.
Check availability and terms with your technician.Get help making the most of your machine, from your very first job.
See it in action before you choose
Request a free hands-on demonstration on your site or at Fibernet’s test facility. Discuss a real job with the technician.
Request a free demonstration
Cable jetting machine hire starts with a practical question: what equipment will suit the cable, duct and working conditions on your project? For contractors installing fibre optic cables in Italy, a machine should be assessed against the planned route rather than selected on an advertised daily rate alone. Cable diameter, duct internal diameter, cable construction and the condition of the installed duct all influence the assessment. Fibernet provides a relevant point of contact for discussing these requirements, drawing on an Italian technical background and its development of cable blowing equipment. Before making commitments around availability or scheduling, share the information needed to establish whether a proposed machine configuration is appropriate for your installation. A useful enquiry includes the cable manufacturer's data sheet, the duct dimensions, the approximate section lengths and the expected number of installation days. Explain whether the route includes frequent bends, changes in elevation or several access chambers. Where available, include information about duct continuity checks, cleaning and pressure testing carried out in accordance with the applicable specifications. These details help identify constraints that a machine alone cannot overcome. An obstructed duct, a damaged connection or an unsuitable cable and duct combination can undermine progress regardless of the equipment selected. Preparing this information early makes technical discussions more productive and reduces the likelihood of discovering an avoidable mismatch after equipment reaches the site. Selecting a cable jetting machine for fiber optic cable installation also involves checking the relationship between the drive mechanism and the cable sheath. The machine must guide and advance the cable without exceeding the manufacturer's permitted mechanical limits. Depending on the equipment configuration, the assessment may cover suitable guides, sealing components, drive adjustments and the means of monitoring operating conditions. Compressed air requirements must be verified against the actual machine documentation, including pressure, flow and any specified air treatment. Do not assume that a compressor already available on site will necessarily be suitable. Connections, hose arrangements and access to the operating position also deserve attention before mobilisation. For a fibre optic cable jetting machine hire enquiry, describe the intended working environment as clearly as the technical dimensions. A compact roadside chamber presents different handling constraints from an open preparation area, and a short work window may make equipment checks particularly important. Ask Fibernet which machine options can be discussed, whether a hire arrangement is available for your location and dates, and what information is required for a meaningful proposal. This approach keeps the conversation focused on an achievable installation plan. It also gives procurement staff and site supervisors a shared basis for comparing suitability, responsibilities and costs before agreeing to any equipment arrangement.
The most useful comparison for cable jetting machine hire is not simply one quoted rate against another. It is the expected cost of having a suitable, complete and usable equipment package available for the required period. A low initial figure can become less attractive if essential accessories, transport or additional days are excluded. Equally, a higher headline figure may need careful examination before its value can be understood. Request a written breakdown and establish exactly which machine configuration is being discussed. Fibernet can be contacted with your project details to clarify the available commercial options, without assuming that a particular hire service, delivery schedule or accessory package is automatically included. Start with the time basis. Ask when the chargeable period begins, how collection or return is handled and what happens if the installation programme changes. Weather, access permissions and incomplete duct preparation can affect when the equipment is actually needed. Clarify the process for extensions before an overrun occurs, and distinguish planned working days from any transport or waiting periods. If several teams will use the same equipment, identify who is responsible for checking it between locations. A clear handover record should describe the equipment supplied, its visible condition and the accessories included. This is useful for both operational continuity and the resolution of any later disagreement about missing or damaged components. Accessory compatibility can have a direct effect on the overall budget. Ask whether the proposed arrangement includes the guides and seals required for your cable and duct dimensions, and establish which consumables must be sourced separately. Compressor provision, suitable hoses and any required air treatment should also be addressed explicitly. When comparing a cable jetting machine price with the cost of temporary access, use equivalent configurations rather than treating every quotation as interchangeable. A purchase figure for a basic machine cannot be meaningfully compared with a temporary arrangement that includes a different set of components. The same principle applies to maintenance responsibilities, transport packaging and the availability of technical documentation. Repeated installation work may justify a broader commercial discussion. A contractor with continuous demand could assess ownership alongside temporary equipment access, while a business facing an isolated project may place greater value on avoiding long term storage and maintenance obligations. A used cable jetting machine is another possible comparison, but its condition, compatibility and service history require separate evaluation. None of these routes is automatically the best choice. Build the decision around expected utilisation, the suitability of the equipment and the responsibilities your team can realistically manage. Send Fibernet a concise project brief and ask for clarification of the options actually available, so that your decision rests on written information rather than assumptions about price or service scope.
Fibernet's background gives contractors a clear reason to include the company in their equipment discussions. Founded in 2001, the business builds on the technical experience of Giancarlo Trinei, whose work with fibre optic installations in Italy began in the early 1980s. That practical foundation later supported the development of the company's own cable blowing equipment, including the launch of its first machine, Lady, in 2021. For a contractor researching cable jetting machine hire, this history is relevant as a starting point for technical questions, not as a substitute for checking specifications. The right decision still depends on the cable, duct, operating conditions and commercial terms of the individual project. Discuss how the proposed equipment would fit into your team's working method. Ask about preparation, component changes, routine checks and the documentation supplied with the machine under the arrangement being considered. Operators should understand the controls and follow the manufacturer's instructions before beginning work. The installation procedure should also respect the cable manufacturer's limits and the site's safety requirements. Compressed air introduces hazards that require suitable precautions, secure connections and controlled depressurisation before components are disconnected. If your team needs clarification about a particular configuration or operating step, raise the question before mobilisation rather than relying on assumptions made during a busy installation shift. When evaluating a fiber optic cable jetting machine, ask how the relevant configuration accommodates your cable and duct sizes and which adjustments must be verified before operation. Request confirmation of the technical limits applicable to that configuration instead of extrapolating from another model or a previous project. Installation distance cannot responsibly be treated as a universal guarantee: bends, friction, cable characteristics, duct condition and air supply can all affect the result. A useful technical exchange separates documented machine capabilities from outcomes that depend on site conditions. That distinction helps supervisors plan work sections and gives procurement teams a more accurate understanding of what they are obtaining. For projects in Italy, communicate the delivery location, access restrictions and intended dates early. For enquiries involving other countries, ask Fibernet to confirm destination coverage, transport arrangements and any applicable documentation requirements before planning around shipment. The company's Italian roots and international ambitions should be considered alongside the practical details of your order or equipment request. Whether your search began with fibre optic cable jetting machine price information or temporary equipment access, the next step is the same: provide an accurate brief and request a specific response. Include dimensions, route characteristics, expected utilisation and the support questions that matter to your team. This creates a sound basis for assessing suitability and confirming availability without making unsupported assumptions about hire services, performance or delivery commitments.
Fill in the form and discover what Fibernet Srl can do for you!
Contact us!Before you get started
If you prefer, speak to us directly.
+39 346 652 9915Compare the cable diameter, duct diameter and installation distance. Lady is compact and lightweight for short runs. Opera is pneumatic and designed for long runs. Geniale is electric and handles both. A Fibernet technician can help you choose.
Yes. You can request a free hands-on demonstration on your site or at Fibernet’s test facility. Tell us what you need in the form and a technician will arrange it with you. Request a demonstration.
To get a price, contact a Fibernet adviser using the form or call +39 346 652 9915.
Fibernet offers direct technical support, spare parts ready to ship and dedicated training. If your machine breaks down, a replacement may be available. Ask your technician about availability and terms.
Tell us about your job. We’ll help you find the right cable blowing machine.